FOCUSRITE MY ACCOUNT REGISTRATION IS DONE

ThereвЂ™ also a versatile, vintage design variable high-pass filter to control whatвЂ™s going on at the bass end. On the back: four line inputs and switchable insert points on each channel to allow routing via external signal processors. Record and edit music.In addition to the mic inputs, there are four front-panel instrument inputs, making the Focusrite ISA428 MKII ideal for overdubs in the control room with no need for a DI box. Remove your interface from your account. Pro Tools First Ableton Live Lite Focusrite Red 2 & 3 Plug-in Suite Softube Time and Tone bundleAs you can see, I have the Focusrite Saffire Pro 40 set up as my output device. Focusrite Control (Mac and Windows versions available) - see NOTE below Multi-language User Guides Licence codes and links will be provided for the following bundled software within your account page.

Focusrite My Account Registration Is Done

If you need to de-register a product for any reason please submit your request to our Support Team. To avoid any accidental loss of included downloads, all product de-registration is done internally. Optionally available for the ISA428 MkII is a precision eight-channel A-D converter with 122dB dynamic range and superb jitter performance ideal for simple interfacing with your DAW.Applies To: All products.

THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter) Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim Frequency response at maximum gain (60dB): -2.5dB at 20Hz and -3dB 103kHz Frequency response at minimum gain (0dB): -0.35dB at 20Hz and -3dB at 122kHz Or you can experiment and bring out just the qualities you want. The original Focusrite mic pre was designed to suit the microphones of the time todayвЂ™s model makes a small change, adding three additional input impedances to the classic ISA110 setting, allowing you to match any microphone, old or new, and access a wide range of sounds, from the character and warmth of a vintage mic to the clear transparency of a modern design.

THD+N: 0.006% (measured with -20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter) Gain range: +10dB to +40dB continuously variable Frequency Response at +40dB gain: -3dB at 20Hz and -3dB at 38.4kHz Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz SNR: 113dB (relative to 0dBFS +22dBu). SNR: 116dB (relative to max output 25dBu)

Meter panel calibration value in dBFS / Equivalent dBu value The meter calibration points are as follows: Вў 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point) Roll off = 18dB per octave 3 pole filter

4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176. 4 Input selection indicators (Mic, Line, Inst) 4 30-60 mic gain range selection indicator IEC power input connector 100Vac вЂ“ 240Vac 4 insert send ВјвЂќ TRS jacks on rear panel 4 insert return ВјвЂќ TRS jacks on rear panel